Foam: Total War
March 28, 2024, 05:14:17 pm
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: See Announcements
 
  Home Help Search Links Staff List Members Login Register  

CPVC Magstrike Modification

Pages: [1]
  Print  
Author Topic: CPVC Magstrike Modification  (Read 693 times)
0 Members and 1 Guest are viewing this topic.
Megamannt92
Administrator
Full Member
*****
Offline Offline

Posts: 209


View Profile WWW
« on: August 04, 2007, 08:14:25 am »

Mag-Strike Clip Modification (CPVC)
Putting PVC in your Mag clips drastically increases the overall range and power of your Magstrike.

What you will need:

-Pair of needlenose plyers
-Butter knife
-Hot glue/Hot glue gun
-Flat screwdriver
-Sandpaper(maybe if you mess up)
-Hammer
-Pipecutter/Hacksaw
-CPVC Pipe


OK lets get started. Pick up your clip, take your plyers, pull out the AR sticks and then flip over the clip and bore out the other pieces of plastic in the back like so. Ok that was the obvious and easy part.


Now the PVC part. Ok turn your clip over and locate the small slit in the back (look at the pic)
Take a butter knife and slide it under the piece carefully, don’t do it too fast otherwise you will break it(the plastic is very thin). All right now that is off you will see the bottom of the default barrels, flip it over to the top again now and use the flat screwdriver to separate the barrels from the side of the clip. Do it slowly and carefully if you break the outside of the clip it will be beyond help.....After that the barrels should come out rather easily....

Ok now you have a empty clip cut the CPVC pipes, you can make them a little longer than the original barrels. Now put the bottom flat piece that we removed earlier back on keep it pressed on a table so it stays even....Now hot glue the barrels in from the inside. There your done!       


If for some reason the clip does not fit into the gun, sand the back of the clip until it fits into the gun.
Report Spam   Logged

Share on Facebook Share on Twitter

Sarge
Spartan-117
Administrator
Sr. Member
*****
Offline Offline

Posts: 276


Hoo-rah!


View Profile WWW
« Reply #1 on: August 23, 2007, 03:50:59 pm »

Good write up, this may help if I ever get a Magstrike. Thanks, Mega.

-Sarge
Report Spam   Logged



Pages: [1]
  Print  
 
Jump to:  

Powered by WebRing.
Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum

Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy